Virus.Org  IT Security News and Information Portal. We offer the latest IT security news, updates, product reviews, books, and articles for all you IT security professionals out there. Enter and get the best IT security information on the Internet.

 

. Welcome to the Virus.Org Mailing List Archive  
.
.


[Date Prev] [Date Next] [Thread Prev] [Thread Next] [Date Index] [Thread Index]


[VPN] VPN tunnel between Sidewinder 5.2.1.0.7 and Netscreen 5XP
.

  • To: [EMAIL PROTECTED]
  • Subject: [VPN] VPN tunnel between Sidewinder 5.2.1.0.7 and Netscreen 5XP
  • From: "Kokes, Tim" <[EMAIL PROTECTED]>
  • Date: Wed, 2 Apr 2003 09:12:53 -0600
  • Sender: [EMAIL PROTECTED]
.
 
Title: VPN tunnel between Sidewinder 5.2.1.0.7 and Netscreen 5XP

Has anyone configured a Site to Site VPN tunnel between a Sidewinder 5.2.1.0.7 and Netscreen 5XP? I've setup both peers and the SA does not like the way netscreen is formatted the VPN communication.

Setup taken:

NETSCREEN:

      VPN Tunnel:

               Gateway = YYY.YYY.YYY.YYY

                Static IP: XXX.XXX.XXX.XXX

                            "Aggressive"

                            Phase1 proposal = 3DES, SHA1, DH2  (pre-g2-3des-sha)

                    pre-share = XXXXXX

                AutoIKE:

                        Name = NT1-FW2

                        Remote gateway = FW2                         

                        Phase2 proposal = 3DES, SHA1, DH2, (nopfs-esp-3des-sha)

            Policy:

                         NAME: NT1-FW2

                         Source, JAMACA (172.20.100.0)

                         Destination, BLM.Corp (10.10.0.0)

                         Service, ANY

                         NAT, OFF

                         Action, Tunnel

                                   "Check modify incoming VPN policy"

                     

Sidwinder:

      SA Netscreen-DSL-PRESHARE

        Local subnet = 10.10.0.0 /16

            Remote = 172.20.100.0 /24      

     

      VPN Tunnel:

                Pre-Share Secret = XXXXXXX

                Accept = 3DES - SHA1

                Phase1 = 28800 TTL 3DES, SHA1, DH2

                Phase2 = 3600 TTL 3DES, SHA1,

 

 
.
.
 
Copyright (c) Virus.Org 1997-2006.
All Trademarks Acknowledged.
Please view our Terms and Conditions and our Privacy Policy.